Diagnose soonComputer-related fault. Needs professional diagnosis.
Your engine computer's internal self-test failed - the computer itself is reporting that it's faulty. This is serious, but rule out bad power first because computers lie when they're underfed.
Model notes: Get a second opinion before replacing an ECM for this code - it is one of the most misdiagnosed codes because power problems mimic it so well.
Key facts
P0606 means eCM/PCM processor fault. Your engine computer's internal self-test failed - the computer itself is reporting that it's faulty. This is serious, but rule out bad power first because computers lie when they're underfed. WrenchFair's published fair-price range for this repair is $300–$1200 parts and $150–$400 labor at independent shops.
WrenchFair rates P0606 a 4-of-5 DIY difficulty (“Prove power and ground perfect before condemning the module - modules are expensive.”) with a “Diagnose soon” driveability rating: Computer-related fault. Needs professional diagnosis. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2018–2018 Dodge Journey (2.4L Tigershark I4) — Stall or no-start — PCM voltage-regulator recall U87:Factory-documented
Dealer-only repair — the PCM is replaced, not repaired. If your 2018 Journey stalls or cranks without starting, check this recall by VIN before paying for sensors or pumps.
Do this test first: Load-test ECM power and ground circuits - voltage drop under load reveals bad connections
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P0606 on the 2018–2018 Dodge Journey — but the community-sourced Stall or no-start — PCM voltage-regulator recall U87 note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Torque specs
PCM/module fasteners: verify — No owner-serviceable torque values for a dealer PCM replacement; confirm against factory service info if a module is ever removed.
Tips
The PCM circuit board may carry a suspect voltage-regulator chip. When it fails you get a no-start, a start-then-immediate-stall, or an engine stall while driving — with no prior warning. Do not replace crank sensors, fuel pumps, or ignition parts to chase this first.
This is a documented free route: dealers replace the powertrain control module free of charge (FCA campaign U87, NHTSA 18V-524, recall began October 2, 2018, 12,779 vehicles).
Applies to 2018 Journeys (also covers other 2018 FCA models); the dealer identifies affected PCMs by sales code — the service instructions specifically added 2.4L sales codes ED6/ED8.
Check by VIN with FCA customer service at 1-800-853-1403; an unrepaired vehicle in this group can stall at any time.
Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
check engine light
erratic behavior
no-start
limp mode
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Failing ECM processor (most common)
Voltage supply problem mimicking processor fault
Overheating ECM
Water or corrosion damage
Owner notes linked to P0606: 3 across 2 repairs — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Load-test ECM power and ground circuits - voltage drop under load reveals bad connections Tests: Voltage supply problem mimicking processor fault
Check for technical service bulletins - some processor faults have software fixes Tests: Voltage supply problem mimicking processor fault
Inspect for water intrusion and overheating Tests: Overheating ECM
Replace and program the ECM only after everything else is ruled out
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2018–2018 Dodge Journey: Stall or no-start — PCM voltage-regulator recall U87 — test first, then buy for this job.
The price range below is a national planning range for P0606 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$300 – $1200
Labor$150 – $400
Module replacement plus programming. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0606 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Prove power and ground perfect before condemning the module - modules are expensive.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →