How WrenchFair is built

No page on this site should leave you wondering “who says so?” Here is exactly where every layer of a WrenchFair guide comes from — and what we refuse to publish.

Who's behind this

WrenchFair is built by Robbie, a fellow DIYer — not a mechanic and not a shop. He maintains his own cars (a 2016 Audi A7 3.0T and a 2016 VW Jetta) with his own scan tools, and built WrenchFair because he wanted straight answers when a code popped up. It is operated by Absideon LLC.

Where code definitions come from

Generic OBD-II codes (P0xxx, B0xxx, C0xxx, U0xxx) are defined by the SAE J2012 standard — the same definition applies to every make. That is not our opinion; it is the standard. Manufacturer-specific codes are interpreted from factory service documentation and scan-tool data.

How causes get ranked

Each code page lists likely causes in check order, ranked by real-world evidence: technical service bulletins, owner-forum and community repair reports, NHTSA complaint patterns, and structured audits of our own content. A code tells you what the vehicle noticed — not which part failed — so we never declare a single root cause from a code alone. The diagnostic steps are ordered so the cheapest, most likely checks come first.

Owner-verified repair notes

The site carries nearly 2,000 vehicle-specific repair notes (October 2026), researched from owner forums and dedicated guides. Every note requires at least two independent sources, is rewritten in our own words, and keeps its source URLs so you can check the original. Topics that cannot be verified get rejected, not padded. Torque specs without a published source are labeled verify. “Owner-verified” means the fix was reported and confirmed by vehicle owners in the community — and the handful of repairs Robbie has done on his own cars carry a Robbie-tested badge, meaning he performed the repair himself and confirmed the fix.

Recalls, complaints, and bulletins

Vehicle pages draw on public NHTSA records: recall campaigns (real campaign numbers and unit counts), owner complaint excerpts (scrubbed of personal details), and manufacturer communications (service bulletins). Bulletin documents are link-checked before we publish them. We report campaign numbers, counts, dates, and links — never the bulletin's own text.

How price ranges work

Every code page shows typical US national ranges for parts and labor. These are honest ranges, not quotes. For labor context we use published industry numbers, not guesses: about half of US independent shops charge $120–$159 per hour (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate is $163/hr (NABR LaborRateHero, June 2026). Dealer prices usually run higher than independents — the site says so when a job leans on dealer-only work.

What we will not publish

  • No invented specs, prices, torque values, or repair outcomes. If we cannot verify it, it does not ship.
  • No high-voltage battery, motor, or inverter guidance — that is specialist territory, and we say so on the page.
  • No paid placements. Shops and products cannot buy a recommendation. Some links are affiliate links — disclosed next to the recommendation — which fund the site's upkeep at no extra cost to you.

Always improving

WrenchFair is audited continuously: cause orderings, price ranges, and repair notes are re-checked against new evidence, and corrections ship when they are found.