Diagnose soonLimp mode protects the engine. Avoid hard acceleration until diagnosed.
Your turbo isn't making full boost - the car feels gutless, especially uphill. Usually a torn diverter valve or a boost leak, not a dead turbo.
Model notes: Pressure-test or smoke-test the charge piping. Log requested vs actual boost - actual tracking below requested under load confirms it before buying parts.
Key facts
P0299 means turbocharger/supercharger underboost condition. Your turbo isn't making full boost - the car feels gutless, especially uphill. Usually a torn diverter valve or a boost leak, not a dead turbo. WrenchFair's published fair-price range for this repair is $60–$300 parts and $100–$300 labor at independent shops.
WrenchFair rates P0299 a 3-of-5 DIY difficulty (“DV is easy; finding piping leaks takes patience.”) with a “Diagnose soon” driveability rating: Limp mode protects the engine. Avoid hard acceleration until diagnosed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2011–2014 Ford F-250 (6.7L Power Stroke V8 diesel) — 6.7L turbo failure / P0299 underboost (failure-prone 2011–2014 Garrett GT32):Owner-verified
Big driveway job — the turbo sits in the valley at the back of the 6.7. Shops often pull the cab, but owners do it cab-on with patience; plan a full weekend, not an afternoon.
Do this test first: Pressure-test or smoke-test the charge piping
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P0299 on the 2011–2014 Ford F-250 — but the community-sourced 6.7L turbo failure / P0299 underboost (failure-prone 2011–2014 Garrett GT32) note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Torque specs
Turbo pedestal / mounting hardware: verify — The 6.7 turbo has a multi-bolt pedestal pattern with sequence-sensitive specs — confirm against factory service info for your year rather than guessing.
Tips
The 2011–2014 trucks run the Garrett GT32 SST variable-vane turbo with ceramic ball bearings — the failure-prone unit of the 6.7 family. Owners on Ford Truck Enthusiasts pulling a P0299 (turbo underboost) report the turbo being beyond cleaning and needing replacement. The 2015+ GT37 switched to a steel-bearing design, which is why this note stops at 2014.
Before buying parts, work the cheap diagnosis the forum veterans lay out: clean the turbo vanes, the EBP sensor tube, the EGR valve, and the MAP sensor tube — and check for a cracked exhaust flex joint or a leaking CAC boot, both of which mimic a dead turbo. One owner was told to order an EBP sensor first; the experienced voices say clean before you spend.
If the turbo is genuinely done, the community-standard fix is a replacement unit — and 2011–2014 trucks need the Warlock retrofit kit to take the later-style turbo (both KC Turbos and SPE document this fitment split). Budget for new pedestal gaskets and consider the VGT solenoid while you are in there.
Do not ignore it: driving long-term on P0299 means reduced power and extra soot loading the DPF and emissions system, which turns a turbo job into an emissions job.
Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
loss of power
limp mode under load
whooshing noise
check engine light
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Torn diverter/blow-off valve diaphragm 11 owner notes link this repair to P0299
Boost leak (intercooler piping, clamps) 3 owner notes link this repair to P0299
Sticking wastegate or failed boost control solenoid 11 owner notes link this repair to P0299
Failing turbocharger (last resort) 11 owner notes link this repair to P0299
Owner notes linked to P0299: 15 across 3 repairs — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Pressure-test or smoke-test the charge piping
Remove and inspect the diverter valve diaphragm Tests: Torn diverter/blow-off valve diaphragm
Log requested vs actual boost under load
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2011–2014 Ford F-250: 6.7L turbo failure / P0299 underboost (failure-prone 2011–2014 Garrett GT32) — test first, then buy for this job.
The price range below is a national planning range for P0299 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$60 – $300
Labor$100 – $300
Diverter valve or hose fix is typical; turbo replacement is far more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0299 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — DV is easy; finding piping leaks takes patience.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →