P0108

P0108: Manifold absolute pressure sensor circuit high input

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The manifold pressure sensor is reading impossibly high, tricking the computer into thinking you're flooring it constantly. It over-fuels, giving you black smoke and terrible mileage.

VW/Audi note (VCDS): KOEO barometric comparison is the key test: the sensor must read atmospheric pressure with the engine off.
Model notes: Rich running from a false high MAP reading will foul spark plugs quickly - check and clean or replace plugs after fixing the sensor.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check KOEO reading - pegged high with the engine off confirms the fault Tests: Failed MAP sensor reading high (most common)
  2. Unplug the sensor: if the reading drops to the low default, the sensor is bad; if it stays high, the wiring is shorted Tests: Failed MAP sensor reading high (most common)
  3. Inspect the port for blockage
  4. Check the 5V reference is not shorted to the signal wire Tests: Signal wire shorted to voltage or to the 5V reference

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$10 – $250
Labor$50 – $150

Cleaning is cheap; sensor replacement costs more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0108 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — High input usually means a short or a dead sensor - the unplug test narrows it fast.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →