P0105

P0105: Manifold absolute pressure sensor circuit malfunction

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The sensor measuring pressure inside the intake manifold has an electrical fault, so the computer misjudges how hard the engine is working and fuels it wrong.

VW/Audi note (VCDS): Log MAP alongside RPM on a test drive; the two should track together smoothly with no flat spots or dropouts.
Model notes: The key-on-engine-off barometric reading is the fastest MAP test there is - it should match your local weather station pressure within a few kPa.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. With key on and engine off, the MAP should read near barometric pressure (roughly 100 kPa at sea level) - a wrong KOEO reading condemns the sensor or its reference voltage
  2. Inspect the vacuum hose for cracks and the manifold port for carbon blockage Tests: Carbon-clogged MAP sensor port in the manifold
  3. At warm idle, expect roughly 30-40 kPa; snap the throttle and watch it jump toward atmospheric
  4. Verify the 5V reference and ground at the connector Tests: Damaged wiring or connector

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$10 – $250
Labor$50 – $150

Cleaning is cheap; sensor replacement costs more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0105 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — The sensor is usually one bolt and a connector; the vacuum hose and port deserve inspection before replacing it.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →