Diagnose soonA stretched chain only gets looser - if it jumps teeth, valves meet pistons. Schedule the repair; don't road-trip on it.
Your engine's timing chain has stretched (or a tensioner is failing), so the camshafts on one side of the engine are out of sync with the crankshaft. You'll feel less power and worse mileage, and it only gets worse.
Model notes: Extremely common on GM 3.6L LY7/LLT (Cadillac CTS/SRX, Chevy Traverse, GMC Acadia, Buick Enclave, Saturn Outlook, Suzuki XL7) and 2.8L LP1. Revised parts exist - don't reinstall the old-design chain.
Key facts
P0008 means engine position system performance bank 1. Your engine's timing chain has stretched (or a tensioner is failing), so the camshafts on one side of the engine are out of sync with the crankshaft. You'll feel less power and worse mileage, and it only gets worse. WrenchFair's published fair-price range for this repair is $250–$700 parts and $800–$2200 labor at independent shops.
WrenchFair rates P0008 a 4-of-5 DIY difficulty (“Diagnosing is easy; fixing means a timing chain job, which is a major teardown on most engines.”) with a “Diagnose soon” driveability rating: A stretched chain only gets looser - if it jumps teeth, valves meet pistons. Schedule the repair; don't road-trip on it. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2007–2012 GMC Acadia (3.6L V6 (LY7/LLT)) — Timing chain stretch (P0008/P0009 cam-crank correlation):Owner-verified
Front timing cover job on the 3.6L — the engine uses three chains (one primary, two secondary), and the usual repair replaces all chains, tensioners, and guides as a set. Owners report shops dropping the engine cradle for access, so get a firm quote up front.
Do this test first: Check oil level and condition first - low oil accelerates chain stretch and can mimic timing faults
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P0008 on the 2007–2012 GMC Acadia — but the community-sourced Timing chain stretch (P0008/P0009 cam-crank correlation) note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Torque specs
Timing components: verify — Chain/tensioner/guide bolt torque not confirmed from an owner source — confirm against factory service info before torquing.
Tips
The signature is P0008 and/or P0009 (camshaft-crankshaft correlation), often with P0016-P0019 companions. Multiple owners and GM techs name a stretched chain or worn tensioners as the usual cause on these engines.
Before condemning the chains, verify the oil is full and clean — the chain tensioners are oil-fed, and low or degraded oil can set the same correlation codes.
GM's own diagnostic guidance says a single failed cam actuator or solenoid will not set P0008; the algorithm is looking for chain alignment between the crank and both cams on one bank. If sensors and oil check out, the chains are the suspect.
A repair-shop owner who specializes in engine work notes that nearly every stretched-chain engine he opens followed long oil-change intervals and showed sludge — his prevention rule is full-synthetic oil on a short interval, which matches what Acadia owners report after repeat failures.
Owner-reported repair bills run around $2,200-$2,500 at dealers for the full chain kit with labor. Some owners had part of the cost covered under extended/warranty coverage — check with a GM dealer by VIN before paying out of pocket.
Do not keep driving on P0008/P0009 hoping it stays a code: a chain that jumps further can leave you with a dead engine on the road.
Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
check engine light
roughness under acceleration
decreased power
poor fuel economy
timing chain rattle or noise on startup
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Stretched timing chain on bank 1 (most common - a known issue on GM 3.6L engines) 3 owner notes link this repair to P0008
Worn or failed timing chain tensioner or guides 3 owner notes link this repair to P0008
Crankshaft reluctor wheel slipped out of its indexed position 3 owner notes link this repair to P0008
Low oil level or pressure accelerating chain wear 3 owner notes link this repair to P0008
Worn camshaft phasers (less common)
Owner notes linked to P0008: 3 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check oil level and condition first - low oil accelerates chain stretch and can mimic timing faults Tests: Stretched timing chain on bank 1 (most common - a known issue on GM 3.6L engines)
Look up technical service bulletins for your engine; some GM 3.6L engines have revised chain kits Tests: Stretched timing chain on bank 1 (most common - a known issue on GM 3.6L engines)
Use live data to watch camshaft-vs-crankshaft correlation on bank 1 at idle and under load Tests: Crankshaft reluctor wheel slipped out of its indexed position
Listen for chain rattle on cold startup, a classic stretched-chain tell Tests: Stretched timing chain on bank 1 (most common - a known issue on GM 3.6L engines)
If correlation is off and the chain is noisy or high-mileage, plan a timing chain, tensioner, and guide replacement
After replacement, verify the crankshaft reluctor wheel is correctly indexed before reassembly
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2007–2012 GMC Acadia: Timing chain stretch (P0008/P0009 cam-crank correlation) — test first, then buy for this job.
The price range below is a national planning range for P0008 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$250 – $700
Labor$800 – $2200
Timing chain, tensioner, and guide replacement (the known fix on affected GM 3.6L engines). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0008 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Diagnosing is easy; fixing means a timing chain job, which is a major teardown on most engines.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →