Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYour regular brakes work fine, but stability control is off. Rule out the battery and connections before paying for a module.
Your stability control computer failed its own internal health check. Your normal brakes work fine, but stability control is switched off.
Key facts
C006C means stability System. Your stability control computer failed its own internal health check. Your normal brakes work fine, but stability control is switched off. WrenchFair's published fair-price range for this repair is $400–$1200 parts and $200–$400 labor at independent shops.
WrenchFair rates C006C a 5-of-5 DIY difficulty (“Power and ground checks are DIY; an internally failed module needs replacement and coding.”) with a “Diagnose soon” driveability rating: Your regular brakes work fine, but stability control is off. Rule out the battery and connections before paying for a module. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
stability control warning light on
abs warning light on
stability control intervenes at odd times or not at all
Likely causes
internal module fault
low system voltage confusing the module - check the battery and charging system first
corroded power or ground connection at the module
water intrusion into the module
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check battery voltage and the charging system - low voltage causes false internal faults. Tests: low system voltage confusing the module - check the battery and charging system first
2. Inspect the module's power and ground connections for corrosion. Tests: corroded power or ground connection at the module
3. Look for water intrusion around the module. Tests: water intrusion into the module
4. Clear the code: if it returns immediately with good power and grounds, the module needs replacement and coding. Tests: corroded power or ground connection at the module
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$400 – $1200
Labor$200 – $400
A stability control module replacement with coding, roughly $700-$1,400 installed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C006C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Power and ground checks are DIY; an internally failed module needs replacement and coding.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →