P2EAC

P2EAC: Active Radiator Air Flow Control Module A Performance

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The active grille shutters in front of your radiator - which open and close for warm-up and aerodynamics - are reporting a fault in their control module.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Visually inspect the shutters for ice, debris, bent slats, or a stuck motor linkage. Tests: Jammed, iced, or debris-blocked shutter slats (most common)
  2. Command the shutters with a scan tool and watch them move through their full travel. Tests: Jammed, iced, or debris-blocked shutter slats (most common)
  3. Check the shutter module's power, ground, and connector for corrosion. Tests: Jammed, iced, or debris-blocked shutter slats (most common)
  4. Free or straighten jammed slats; replace the actuator or module if it will not drive them. Tests: Jammed, iced, or debris-blocked shutter slats (most common)
  5. Verify full travel and recheck for codes after a drive cycle.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $500
Labor$150 – $350

Active grille shutter actuator or control module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2EAC ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Most fixes are clearing debris or freeing a slat; the bumper sometimes has to come off for module access.

Watch this repair on YouTube

Parts & tools

Cooling system toolkit — what the job actually takes

Torque specs: Thermostat housing bolts: typically 8–12 Nm. Aluminum threads strip easily — verify spec and use a torque wrench.

Pro tip: Bleed the cooling system per the factory procedure after refilling, or trapped air will overheat the engine and fake a “still broken” reading.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →