Diagnose soonUsually no drivability impact since this is a downstream monitor sensor, but emissions and catalyst monitoring are compromised. Diagnose reasonably soon.
The downstream O2 sensor behind the catalytic converter on bank 1 is stuck reading rich - it thinks there is too little oxygen in the exhaust.
Model notes: Seen on 2013 GMC Sierra 1500 5.3L (with P2273), 2012 Buick Regal 2.4L, 2010 Chevy Cobalt, 2008 Chevy Express 4.3L, 2012 VW Golf 2.0 TDI, 2009 Chevy Aveo. Auto brands include VW, Honda, Dodge, Hyundai, Ford, GMC, Acura.
Key facts
P2271 means o2 sensor signal biased/stuck rich bank 1 sensor 2. The downstream O2 sensor behind the catalytic converter on bank 1 is stuck reading rich - it thinks there is too little oxygen in the exhaust. WrenchFair's published fair-price range for this repair is $50–$200 parts and $50–$150 labor at independent shops.
WrenchFair rates P2271 a 3-of-5 DIY difficulty (“Visual inspection and downstream O2 sensor replacement are intermediate work; live-data monitoring requires a scan tool.”) with a “Diagnose soon” driveability rating: Usually no drivability impact since this is a downstream monitor sensor, but emissions and catalyst monitoring are compromised. Diagnose reasonably soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Service bulletins: 482 factory bulletins on file for this vehicle (mostly Equipment, Electrical System, Structure) — see the latest ones
On your 2019–2026 Toyota Corolla (1.8L (2ZR-FAE), 2.0L (M20A-FKS)) — O2 (oxygen) sensors:Owner-verified
Toyota's E210 repair manual labels BOTH positions 'air fuel ratio sensor': the upstream B1S1 wideband A/F sensor threads into the exhaust manifold (TWC front catalyst) at the rear of the engine — reaching it from above requires removing the windshield wiper motor/link, outer cowl top panel, and dash panel heat insulator first, which is the main pain point. The downstream B1S2 sensor threads into the front exhaust pipe after the rear catalyst and is reached from underneath after removing the front floor center brace (4 bolts). Both use a 22 mm O2-sensor socket (Toyota SST 09224-00012).
Do this test first: Visually inspect the wiring and connectors for corrosion, rubbed/chafed/bent wires, bent/loose pins, burnt appearance, or crossed wires.
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P2271 on the 2019–2026 Toyota Corolla — but the community-sourced O2 (oxygen) sensors note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Torque specs
A/F sensor, S1 and S2 (2.0L M20A-FKS): 44 Nm (32 lb-ft) — Specified tightening torque; if using the SST offset tool with a torque wrench, use the 37.7 Nm wrench reading per the manual.
Front floor center brace bolts (S2 job): 29 Nm (21 lb-ft) — 4 bolts that must come off to reach the downstream sensor.
No. 3 sensor bracket bolt (S2 job): 13 Nm (10 lb-ft) — Bracket on the front suspension crossmember.
Tips
The upstream B1S1 is a true wideband A/F sensor (planetary/heater-integrated type), not a conventional narrowband O2 sensor — buy the Denso OE-spec part, not a universal splice-in.
A lazy upstream A/F sensor can tank fuel economy (e.g., 35 down to 28 mpg) with no check-engine light; graph live A/F data at a steady 2,500 rpm to confirm before replacing.
New Denso A/F sensors ship with anti-seize already on the threads — do not add more.
The repair manual requires an 'Inspection after repair' procedure plus an exhaust-gas-leak check after either sensor is replaced.
Typical difficulty: Moderate — based on 841 code guides for the sensors repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
most likely no drivability issues since this is not sensor 1
malfunction indicator lamp (MIL) illumination
in some cases the engine may run rough
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Contaminated or failed HO2S2 (sensor 2)
HO2S2 wiring/circuit problem
Fuel pressure incorrect
Faulty fuel injector
Engine coolant leak
Faulty purge solenoid valve
PCM failure
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Visually inspect the wiring and connectors for corrosion, rubbed/chafed/bent wires, bent/loose pins, burnt appearance, or crossed wires.
Check for exhaust leaks or other problems and repair as necessary. Tests: HO2S2 wiring/circuit problem
Using a DVOM set to ohms, check harness connectors for resistance and compare to manufacturer specifications.
With the engine at normal operating temperature in closed loop, monitor sensor readings on the scan tool - a stuck-rich rear HO2S will likely sit at 1V; revving the engine should cause the voltage to change.
If replacing the O2 sensor, buy an OEM one for best results; inspect a removed sensor for fuel, engine oil, and coolant contamination.
If the sensor checks out, test fuel pressure, inspect the purge solenoid valve, fuel injectors, and coolant passages for leaks.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2019–2026 Toyota Corolla: O2 (oxygen) sensors — test first, then buy for this job.
Expensive fork: Catalytic converter — only if the downstream waveform shows a dead cat after a good sensor and no exhaust leak.
The price range below is a national planning range for P2271 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$50 – $200
Labor$50 – $150
Oxygen sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2271 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Visual inspection and downstream O2 sensor replacement are intermediate work; live-data monitoring requires a scan tool.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →