P2271

P2271: O2 sensor signal biased/stuck rich bank 1 sensor 2

For your specific vehicle: P2271 on a 2019–2026 Toyota Corolla

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The downstream O2 sensor behind the catalytic converter on bank 1 is stuck reading rich - it thinks there is too little oxygen in the exhaust.

Model notes: Seen on 2013 GMC Sierra 1500 5.3L (with P2273), 2012 Buick Regal 2.4L, 2010 Chevy Cobalt, 2008 Chevy Express 4.3L, 2012 VW Golf 2.0 TDI, 2009 Chevy Aveo. Auto brands include VW, Honda, Dodge, Hyundai, Ford, GMC, Acura.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Visually inspect the wiring and connectors for corrosion, rubbed/chafed/bent wires, bent/loose pins, burnt appearance, or crossed wires.
  2. Check for exhaust leaks or other problems and repair as necessary. Tests: HO2S2 wiring/circuit problem
  3. Using a DVOM set to ohms, check harness connectors for resistance and compare to manufacturer specifications.
  4. With the engine at normal operating temperature in closed loop, monitor sensor readings on the scan tool - a stuck-rich rear HO2S will likely sit at 1V; revving the engine should cause the voltage to change.
  5. If replacing the O2 sensor, buy an OEM one for best results; inspect a removed sensor for fuel, engine oil, and coolant contamination.
  6. If the sensor checks out, test fuel pressure, inspect the purge solenoid valve, fuel injectors, and coolant passages for leaks.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $200
Labor$50 – $150

Oxygen sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2271 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Visual inspection and downstream O2 sensor replacement are intermediate work; live-data monitoring requires a scan tool.

Watch this repair on YouTube

Parts & tools

Fuel system toolkit — what the job actually takes

Torque specs: Fuel rail bolts: typically 8–12 Nm — verify spec.

Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →