Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car drives fine, but a lying gauge can leave you stranded - treat the gauge as untrustworthy until fixed.
The float sensor that tells your gas gauge how much fuel is left is giving a bad signal. Often the gauge reads wrong or bounces around. The sender lives inside the tank, usually with the fuel pump. Tip: always refuel with the ignition off, or the reading can glitch.
Key facts
P0464 means fuel Level Sensor Circuit Intermittent. The float sensor that tells your gas gauge how much fuel is left is giving a bad signal. Often the gauge reads wrong or bounces around. The sender lives inside the tank, usually with the fuel pump. Tip: always refuel with the ignition off, or the reading can glitch. WrenchFair's published fair-price range for this repair is $80–$400 parts and $200–$450 labor at independent shops.
WrenchFair rates P0464 a 3-of-5 DIY difficulty (“The sender is inside the tank - access is usually through a panel under the rear seat or by dropping the tank.”) with a “Diagnose soon” driveability rating: The car drives fine, but a lying gauge can leave you stranded - treat the gauge as untrustworthy until fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
fuel gauge reads wrong or fluctuates
check engine light on
distance-to-empty reading wrong
running out of fuel unexpectedly
Likely causes
worn fuel level sender
float arm stuck or binding
damaged wiring to the tank
corroded connector at the pump module
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Watch the fuel level reading with live data while adding fuel - it should change smoothly. Tests: worn fuel level sender
Refuel with the ignition off and see if the reading stabilizes.
Check the wiring and connector at the pump module. Tests: corroded connector at the pump module
Replace the sender (often sold with the pump module) if the signal stays wrong.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $400
Labor$200 – $450
Fuel level sender replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0464 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The sender is inside the tank - access is usually through a panel under the rear seat or by dropping the tank.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →