P0EE6

P0EE6: A/C Refrigerant Distribution Valve B Control Circuit Driver Current/Temperature Too High

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The a/ refrigerant distribution valve control circuit driver current/ is running hotter than its safe limit. The car limits power to protect itself from heat.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. 1. Clear the code and confirm it returns under the same conditions before replacing anything.
  2. 2. Check coolant level, coolant flow, and that the relevant pump and fans actually run. Tests: cooling system fault - pump, fan, or coolant flow (most common)
  3. 3. Look for blocked airflow, debris, or kinked coolant hoses around the a/c refrigerant distribution valve b control circuit driver current/. Tests: blocked airflow or debris
  4. 4. Compare the a/c refrigerant distribution valve b control circuit driver current/ temperature reading on a scan tool against the other temperature sensors - a lone sensor reading far off suggests the sensor, matching high readings suggest a real cooling problem. Tests: temperature sensor reading high (less common)
  5. 5. Fix the cooling fault first, clear the code, and retest under load.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $400
Labor$100 – $300

Repairing the a/c refrigerant distribution valve b control circuit driver current/ cooling fault. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0EE6 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Coolant and electrical checks are DIY-friendly; internal valve or pump replacement varies by vehicle.

Watch this repair on YouTube

Parts & tools

Cooling system toolkit — what the job actually takes

Torque specs: Thermostat housing bolts: typically 8–12 Nm. Aluminum threads strip easily — verify spec and use a torque wrench.

Pro tip: Bleed the cooling system per the factory procedure after refilling, or trapped air will overheat the engine and fake a “still broken” reading.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →