P0846

P0846: Transmission fluid pressure sensor/switch B circuit range/performance

For your specific vehicle: P0846 on a 2015–2020 Ford F-150 · 2016–2021 Honda Civic · 2017–2022 Honda CR-V · 2021–2024 Kia Seltos · 2013–2018 Nissan Altima · 2021–2026 Nissan Rogue
Show all 9 vehicles with this code

2019–2026 Ram 1500 · 2019–2026 Toyota Corolla · 2019–2024 Toyota RAV4

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your transmission's B pressure reading does not add up - either the sensor is lying or the actual fluid pressure is wrong. Either way, shift quality suffers.

Key facts

Symptoms

Likely causes

Owner notes linked to P0846: 9 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check for TSBs and companion codes; diagnose power faults first.
  2. Check fluid level and condition - low fluid causes real pressure problems that mimic sensor faults. Tests: Real hydraulic pressure problem - low fluid, weak pump, stuck valve (most common)
  3. Watch the B-circuit pressure reading on scan-tool live data during shifts. Tests: Failed pressure sensor/switch B reading out of range
  4. Test line pressure with a manual gauge at the transmission test port if the reading looks wrong. Tests: Failed pressure sensor/switch B reading out of range
  5. Inspect the sensor connector and wiring for corrosion before condemning the sensor.
  6. If pressure is truly wrong, suspect the pump, a stuck valve, or internal leaks - specialist territory.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $400
Labor$200 – $500

Transmission fluid pressure sensor/switch replacement or valve-body service. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0846 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Live-data pressure readings separate sensor faults from real hydraulic problems.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →