P0400

P0400: Exhaust gas recirculation flow malfunction

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The system that recycles a little exhaust back into the engine to cut pollution isn't flowing right. You might notice rough idle or a pinging sound when accelerating.

VW/Audi note (VCDS): Command the EGR valve with the scan tool at idle; the engine should stumble as exhaust floods the intake - no stumble means no flow.
Model notes: Short-trip driving builds EGR carbon fastest - regular highway runs help keep the system clean. Always replace the EGR gasket when removing the valve.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Remove the EGR valve and inspect for carbon buildup - clean the valve and passages Tests: Carbon-clogged EGR valve or passages (most common)
  2. Test valve operation: it should move freely and hold vacuum (vacuum type) or respond to commands (electronic type) Tests: Vacuum supply problem to the valve (on vacuum-operated designs)
  3. Check the EGR position sensor feedback with a scan tool Tests: Failed EGR position sensor
  4. Clear the carbon from the intake passages, not just the valve Tests: Carbon-clogged EGR valve or passages (most common)

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $250
Labor$150 – $350

EGR valve replacement is typical. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0400 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Carbon cleaning fixes many EGR faults; passage cleaning can be labor-intensive.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →