P0404: Exhaust gas recirculation control circuit range/performance
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
DIY difficulty 3/5
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0404 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Drive safeEmissions-related fault. Safe to drive; may affect fuel economy slightly.
The exhaust-recycling valve moves, but not quite where the computer tells it to - it's sticky or its position sensor is off. Performance is slightly degraded.
VCDS tip: Graph commanded vs actual EGR position; the two traces should overlay closely through the whole sweep.
Model notes: A valve that moves but can't reach full open or full closed is the textbook range/performance fault - cleaning restores the travel in most cases. Check the wiring and connectors to the valve and position sensor - a top-5 cause on some makes (notably Chrysler).
Key facts
P0404 means exhaust gas recirculation control circuit range/performance. The exhaust-recycling valve moves, but not quite where the computer tells it to - it's sticky or its position sensor is off. Performance is slightly degraded. WrenchFair's published fair-price range for this repair is $80–$250 parts and $150–$350 labor at independent shops.
WrenchFair rates P0404 a 3-of-5 DIY difficulty (“Cleaning often restores range; the position sensor is the next suspect.”) with a “Drive safe” driveability rating: Emissions-related fault. Safe to drive; may affect fuel economy slightly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Clean the valve and its bore thoroughly
Command the valve through its range with a scan tool while watching position feedback Tests: Drifting EGR position sensor
Look for sticking, slow response, or positions it cannot reach Tests: Drifting EGR position sensor
Replace the valve if it cannot track commands after cleaning
Typical price range
Parts$80 – $250
Labor$150 – $350
EGR valve replacement is typical. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →