P02EB: Diesel intake air flow 'A' control motor current range/performance
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFix within a reasonable time.
Your diesel's intake valve motor is drawing the wrong current - the valve is likely binding.
Model notes: Primarily a diesel code.
Key facts
P02EB means diesel intake air flow 'A' control motor current range/performance. Your diesel's intake valve motor is drawing the wrong current - the valve is likely binding. WrenchFair's published fair-price range for this repair is $100–$400 parts and $100–$300 labor at independent shops.
WrenchFair rates P02EB a 3-of-5 DIY difficulty (“Remove and clean the valve first.”) with a “Diagnose soon” driveability rating: Fix within a reasonable time. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
possible rough shutdown
Likely causes
Carbon binding the valve (most common)
Failing valve motor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Remove the valve and inspect for carbon binding Tests: Carbon binding the valve (most common)
Clean and test the valve's movement
Replace the valve if the motor is failing Tests: Failing valve motor
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $400
Labor$100 – $300
Diesel intake air flow control valve cleaning or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P02EB ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →