P006C: MAP/turbo boost pressure correlation, bank 2
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBoost control is compromised on bank 2 - diagnose before driving hard.
Your bank-2 boost sensor disagrees with what the computer expects - a skewed sensor or split hose on that side. Expect boost issues.
Key facts
P006C means mAP/turbo boost pressure correlation, bank 2. Your bank-2 boost sensor disagrees with what the computer expects - a skewed sensor or split hose on that side. Expect boost issues. WrenchFair's published fair-price range for this repair is $30–$150 parts and $80–$200 labor at independent shops.
WrenchFair rates P006C a 2-of-5 DIY difficulty (“Compare bank 1 vs bank 2 readings - the odd one out is the culprit.”) with a “Diagnose soon” driveability rating: Boost control is compromised on bank 2 - diagnose before driving hard. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
overboost or underboost
reduced power
Likely causes
Skewed bank-2 boost/MAP sensor
Split or disconnected sensor hose on bank 2
Wiring fault on the bank-2 sensor circuit
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Compare bank 1 and bank 2 pressure readings at key-on and under boost Tests: Skewed bank-2 boost/MAP sensor
Inspect bank-2 sensor hoses and wiring Tests: Split or disconnected sensor hose on bank 2
Swap sensors bank-to-bank if accessible to confirm the fault follows the sensor Tests: Wiring fault on the bank-2 sensor circuit
Replace the skewed sensor Tests: Skewed bank-2 boost/MAP sensor
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $150
Labor$80 – $200
Bank 2 boost/MAP sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P006C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Compare bank 1 vs bank 2 readings - the odd one out is the culprit.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →