P006A

P006A: MAP/exhaust pressure correlation

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your intake pressure and exhaust pressure readings don't agree - usually the exhaust pressure sensor is fouled with soot. Mostly affects diesels.

Model notes: Primarily a diesel code (Power Stroke, Duramax, Cummins). Gasoline vehicles with an exhaust pressure sensor are rare.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Remove the exhaust pressure sensor tube and check for soot blockage or cracks Tests: Soot-fouled exhaust back-pressure sensor (most common)
  2. Clean the tube and sensor port Tests: Blocked or cracked exhaust pressure sensor tube
  3. Compare exhaust pressure and MAP readings at idle against expected values Tests: Soot-fouled exhaust back-pressure sensor (most common)
  4. Test the MAP sensor independently
  5. Replace the exhaust pressure sensor if it reads skewed with a clear tube

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $200
Labor$80 – $250

Exhaust back-pressure sensor or tube service. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P006A ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — The exhaust pressure sensor tube is the classic failure point - pull it and check for soot blockage.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →