Diagnose soonLarge fuel leak detected - park away from ignition sources, look for visible leaks or fuel smell, and do not drive with an active fuel leak.
The computer thinks a lot of fuel is escaping somewhere - this can be a genuine leak, which is a fire risk, so look for puddles or fuel smell and don't ignore it.
Model notes: Treat every P0093 as a real leak until proven otherwise - a pressure sensor fault is possible but a fuel fire is unforgiving. Inspect first, theorize second.
Key facts
P0093 means fuel system leak detected - large leak. The computer thinks a lot of fuel is escaping somewhere - this can be a genuine leak, which is a fire risk, so look for puddles or fuel smell and don't ignore it. WrenchFair's published fair-price range for this repair is $30–$500 parts and $150–$500 labor at independent shops.
WrenchFair rates P0093 a 3-of-5 DIY difficulty (“Safety first: find the leak before driving. Fuel leaks near exhaust or electrics are a fire hazard.”) with a “Diagnose soon” driveability rating: Large fuel leak detected - park away from ignition sources, look for visible leaks or fuel smell, and do not drive with an active fuel leak. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2011–2016 Chevrolet Silverado HD (6.6L LML Duramax V8 diesel) — Bosch CP4.2 high-pressure fuel pump failure ('CP4 grenade'):Owner-verified
No factory recall for the pump itself on GM trucks (unlike Ford's 6.7L CP4.2 recall). Check your VIN at nhtsa.gov/recalls; the class-action settlement is the only factory-backed relief.
Do this test first: With the engine cold and off, inspect all fuel lines, connections, and injector seals for wetness - do this before starting the engine
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P0093 on the 2011–2016 Chevrolet Silverado HD — but the community-sourced Bosch CP4.2 high-pressure fuel pump failure ('CP4 grenade') note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Torque specs
CP4.2 replacement / CP3 conversion fasteners: verify — A failed-pump repair is typically a shop job; use factory service torque values, not guesses.
Tips
The 2011-2016 LML is the only Duramax generation that shipped with the Bosch CP4.2 injection pump, and it is the engine's defining weak spot. Unlike the older CP3 it replaced, the CP4.2 is extremely sensitive to fuel lubricity: dirty fuel or water wears the internals, metal shavings start circulating, and the pump can destroy itself - and the whole high-pressure fuel system - in minutes, often with little warning.
Early warnings: long cranking, loss of power under load, rough idle, misfires, stalling that won't restart, and codes P0087, P0088, P0093, or P2290. If you find glitter in the fuel filter or water separator, the failure chain has already started - don't keep driving it.
GM's repair scope for a grenaded pump is the entire high-pressure side: pump, fuel rails, all eight injectors, high-pressure lines, return lines, plus cleaning the tank, sending unit, and chassis lines. Paid out of pocket at a dealer this routinely tops $10,000. A federal class action over these pumps reached a $50M final settlement in 2025 covering 2011-2016 Silverado/Sierra HD LML trucks (GM denies the defect); check the settlement terms if you already paid for a repair.
The owner-verified prevention playbook, repeated across DuramaxForum's LML section for years: convert to a CP3 pump before the CP4.2 fails, add a lift pump with real filtration, and change the fuel filter on schedule. A CP3 conversion costs a fraction of a post-failure repair.
2017 and newer trucks are not affected - GM switched the L5P Duramax to a Denso HP4 pump.
Typical difficulty: Moderate — based on 483 code guides for the fuel repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
fuel smell
visible fuel leak
hard starting
loss of power
check engine light
engine cuts out and dies within a minute (fail-safe shutdown)
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Leaking fuel line, hose, or injector seal (most common - inspect immediately)
Failed fuel pressure regulator dumping pressure 2 owner notes link this repair to P0093
Leaking fuel pump module seal at the tank
Faulty rail pressure sensor reporting a false drop 2 owner notes link this repair to P0093
Owner notes linked to P0093: 2 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
With the engine cold and off, inspect all fuel lines, connections, and injector seals for wetness - do this before starting the engine Tests: Leaking fuel line, hose, or injector seal (most common - inspect immediately)
Cycle the key to pressurize the system (without starting) and re-inspect for fresh wetness Tests: Leaking fuel line, hose, or injector seal (most common - inspect immediately)
Verify with a mechanical pressure gauge whether pressure truly drops Tests: Faulty rail pressure sensor reporting a false drop
Repair the leak source; do not drive with an active fuel leak
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2011–2016 Chevrolet Silverado HD: Bosch CP4.2 high-pressure fuel pump failure ('CP4 grenade') — test first, then buy for this job.
The price range below is a national planning range for P0093 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$30 – $500
Labor$150 – $500
Filter is cheap; fuel pump replacement is moderate to expensive. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0093 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Safety first: find the leak before driving. Fuel leaks near exhaust or electrics are a fire hazard.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →