P008F: Engine coolant temperature / fuel temperature correlation
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA lying ECT sensor can cause real overheating protection failures - diagnose soon.
Your coolant and fuel temperature sensors disagree after a cold soak - one of them is lying.
Key facts
P008F means engine coolant temperature / fuel temperature correlation. Your coolant and fuel temperature sensors disagree after a cold soak - one of them is lying. WrenchFair's published fair-price range for this repair is $20–$80 parts and $50–$150 labor at independent shops.
WrenchFair rates P008F a 2-of-5 DIY difficulty (“Compare both sensors' readings on a cold engine - they should match ambient.”) with a “Diagnose soon” driveability rating: A lying ECT sensor can cause real overheating protection failures - diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
possible hard starting
possible cooling fan issues
Likely causes
Skewed ECT sensor (most common)
Skewed fuel temperature sensor
Wiring fault to either sensor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
With the engine cold-soaked, compare ECT and fuel temp to ambient
Replace the sensor that reads wrong
Inspect the wiring if both read oddly
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $80
Labor$50 – $150
Temperature sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P008F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Compare both sensors' readings on a cold engine - they should match ambient.
Torque specs: Thermostat housing bolts: typically 8–12 Nm. Aluminum threads strip easily — verify spec and use a torque wrench.
Pro tip: Bleed the cooling system per the factory procedure after refilling, or trapped air will overheat the engine and fake a “still broken” reading.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →