Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car may run poorly or enter limp mode - diagnose soon.
Your car's three air-measurement sensors disagree with each other. Usually a large intake leak or one bad sensor. Needs methodical diagnosis.
VW/Audi note (VCDS): Fix the single biggest discrepancy first, then retest - these codes often cascade.
Model notes: Smoke-test first - correlation codes love leaks. Then test the MAP and MAF individually.
Key facts
P0068 means mAP/MAF - throttle position correlation. Your car's three air-measurement sensors disagree with each other. Usually a large intake leak or one bad sensor. Needs methodical diagnosis. WrenchFair's published fair-price range for this repair is $30–$250 parts and $120–$300 labor at independent shops.
WrenchFair rates P0068 a 3-of-5 DIY difficulty (“Diagnosis is a process of elimination.”) with a “Diagnose soon” driveability rating: The car may run poorly or enter limp mode - diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
limp mode
check engine light
poor running
rough idle
dead spot off idle
Likely causes
Large intake leak
Failed MAP or MAF
Throttle body fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 2 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Smoke test first - correlation codes love leaks
Then test MAP and MAF individually
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $250
Labor$120 – $300
Diagnosis is the cost driver; the fix is often a hose or one sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0068 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →