Diagnose soonYour regular brakes keep working normally, but ABS, traction control, and stability control are probably disabled until this is fixed. Drive gently on wet or slippery roads.
The relay feeding power to your brake control computer isn't working right. Your normal brakes work fine, but ABS, traction control, and stability control are switched off.
Key facts
C0265 means eBCM Relay Circuit. The relay feeding power to your brake control computer isn't working right. Your normal brakes work fine, but ABS, traction control, and stability control are switched off. WrenchFair's published fair-price range for this repair is $20–$100 parts and $80–$200 labor at independent shops.
WrenchFair rates C0265 a 4-of-5 DIY difficulty (“Relay swaps are easy when the relay is in the fuse box; on cars where it's integrated into the module, it's a module repair.”) with a “Diagnose soon” driveability rating: Your regular brakes keep working normally, but ABS, traction control, and stability control are probably disabled until this is fixed. Drive gently on wet or slippery roads. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2018–2018 Dodge Journey (2.4L Tigershark I4, 3.6L Pentastar V6) — Low/soft brake pedal — rear caliper piston recall U86:Factory-documented
Dealer-only repair; you just need to know the symptom and your build date. The dealer bleeds the brake system (and verifies the calipers) at no charge.
Do this test first: 1. Locate the EBCM relay and check its fuse.
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for C0265 on the 2018–2018 Dodge Journey — but the community-sourced Low/soft brake pedal — rear caliper piston recall U86 note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Torque specs
Brake system fasteners: verify — Confirm against factory service info for the Journey before torquing.
Tips
The signature symptom is a low or soft brake pedal — insufficient coating on the rear brake caliper pistons lets gas pockets form in the fluid, reducing rear brake performance. Do not pay for a brake job to chase this first: it is a factory defect with a free factory fix.
The recall only covers 2018 Journeys built March 17, 2018 through June 21, 2018 (MDH 031706 through 062101). Check your door-jamb build date before calling — if yours falls outside that window, a soft pedal has a different cause.
The remedy is a dealer brake-system bleed, free of charge (FCA campaign U86, NHTSA 18V-523, began September 29, 2018, ~154,000 vehicles across the affected models).
Call FCA customer service at 1-800-853-1403 with your VIN to confirm coverage; have it checked before spending money on master cylinders or boosters for the same symptom.
Typical difficulty: Moderate — based on 265 code guides for the brake repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
abs warning light on
traction control or stability control light on
cruise control stops working
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
EBCM relay failed (most common)
corroded relay socket
wiring fault in the relay circuit
blown fuse in the module power feed
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Locate the EBCM relay and check its fuse. Tests: EBCM relay failed (most common)
2. Swap it with an identical relay from a non-critical circuit and retest. Tests: wiring fault in the relay circuit
3. Inspect the relay socket for corrosion or heat damage. Tests: corroded relay socket
4. Check the relay control wiring back to the module. Tests: wiring fault in the relay circuit
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2018–2018 Dodge Journey: Low/soft brake pedal — rear caliper piston recall U86 — test first, then buy for this job.
The price range below is a national planning range for C0265 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$20 – $100
Labor$80 – $200
A relay replacement, often under $200 installed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0265 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Relay swaps are easy when the relay is in the fuse box; on cars where it's integrated into the module, it's a module repair.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →