Rain is coming and the wipers do nothing — or they work on high but not intermittent, or one arm moves and the other doesn't, or they froze mid-swipe across your view. Wiper failures are almost never mysterious: the system is a switch, a fuse, a motor, and a mechanical linkage, and the exact way it fails tells you which link broke.
Cheapest and easiest first. Don't buy parts until the checks below point at one.
The first check. If the wipers died suddenly and completely — all speeds, both arms — the fuse is the prime suspect. A blown fuse is a symptom though: replace it once, and if it blows again there's a short or a dying motor overloading the circuit.
The motor works on one speed but not others, or groans and moves slowly, or smells hot. Motors die from age and from being run against frozen blades — the most expensive wiper fix, but still a DIY-able one.
One arm moves and the other doesn't, or both arms are limp and floppy: the mechanical linkage between the motor and the arms has a broken joint or a seized pivot. Arms move when you push them by hand with no resistance = linkage, not motor.
Works on high but not on low or intermittent (or vice versa): the switch or the speed relay. Intermittent-only failure is usually the relay; one-speed-only is usually the switch.
The seasonal special: the motor hums but nothing moves because the blades are frozen down. Turn the wipers off immediately — letting the motor strain against ice is how motors and linkages get killed. Lift the blades and clear the ice first.