U3502

U3502: Control Module Input Power A Circuit High

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car's computer module is getting too much voltage on its power A wire. Overvoltage can damage electronics, so check the charging system promptly - this one is more urgent than a low-voltage code.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Test the battery and charging system first - system-wide voltage problems cause most of these codes. Tests: Alternator or voltage regulator overcharging (most common - test the charging system…
  2. Inspect the module's power connector for loose pins, corrosion, or heat discoloration.
  3. Back-probe the input power A feed at the module and watch it while wiggling the harness and tapping the relay.
  4. Trace the feed back through its fuse and relay, testing each connection for resistance or voltage drop. Tests: Wiring fault backfeeding voltage into the feed
  5. Repair the faulty connection or wire, clear the code, and confirm the feed stays steady.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$55 – $690
Labor$75 – $500

Alternator or voltage regulator repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U3502 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — The fix is usually a connector or a wire; the challenge is catching an intermittent or marginal fault in the act.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →