U3031

U3031: Ignition Output Off

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car's computer controls a power feed that turns on with the key in the off position, and that feed isn't switching correctly. The circuits it powers may be dead - or stuck on and draining the battery.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Find the ignition Off output relay and fuse in the fuse box diagram. Tests: Failed ignition output relay with worn or stuck contacts (most common - swap-test first)
  2. Swap the relay with an identical one - if the fault moves, replace the relay. Tests: Failed ignition output relay with worn or stuck contacts (most common - swap-test first)
  3. Test the output fuse and check whether the output feed is present with the key in the off position and absent with the key off. Tests: Blown fuse on the ignition Off output feed
  4. If the relay and fuse are good, trace the output wiring for shorts or opens. Tests: Wiring fault or short in the output circuit
  5. If wiring, relay, and fuse all test good, the module's output driver is suspect.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$45 – $460
Labor$75 – $350

Ignition output relay or fuse replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U3031 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — The relay and fuse checks take minutes with the fuse box diagram; wiring faults take longer but follow the same steps as any power feed.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →