U301F

U301F: Control Module Wake-up Circuit B Low

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The wire that wakes up one of your car's computer modules is stuck at no-signal. The module never wakes up, stops communicating, and its functions go dead.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Identify which module is affected and find the wake-up line B in the wiring diagram. Tests: Failed wake-up source module holding the line low
  2. Check for continuity on the wake-up wire from source to module - an open here is the most common find. Tests: Failed wake-up source module holding the line low
  3. Check the wire for shorts to ground and to power. Tests: Wake-up wire shorted to ground (most common)
  4. Inspect every connector in the path for corrosion, loose pins, or water. Tests: Corroded connector shorting the signal to ground
  5. Wiggle the harness while watching the signal to catch intermittent breaks, then repair and confirm the module wakes and sleeps normally.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$55 – $460
Labor$75 – $350

Wake-up circuit wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U301F ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — The tests are simple multimeter and continuity work; the challenge is locating the wake-up wire in the diagram.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →