U3018

U3018: Control Module Input Power Circuit A/B Correlation

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car's computer compares two power signals that should agree, and they don't - like one wire saying the key is on while the other says it isn't. Usually a bad relay, fuse, or wire on one of the two circuits, not a dead computer.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Identify the two feeds the module is comparing from the service information.
  2. Check the fuse and relay on each feed - the fault is almost always on one side, not both. Tests: Blown fuse on one feed
  3. With the key in the relevant position, compare actual voltage on both feeds at the module connector. Tests: Wiring fault, corroded connector, or high resistance on one side
  4. Trace the dead or weak side back through its relay, fuse, and wiring until you find the break. Tests: Wiring fault, corroded connector, or high resistance on one side
  5. Repair the faulty side, clear the code, and confirm both feeds agree in every key position.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$55 – $580
Labor$75 – $500

Relay or fuse replacement on the faulty feed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U3018 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — The trick is identifying which two feeds are being compared; after that it's standard fuse-and-relay testing on each side.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →