U069B

U069B: Lost communication with exhaust gas temperature sensor bank 1 sensor 4

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

There's a heat sensor in your exhaust that protects expensive parts like the turbo and the emissions filter from overheating. It stopped responding. The computer can't protect that section of exhaust, so it may limit power to stay safe.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Find EGT sensor 4 on bank 1 — follow the exhaust from the manifold; sensor 1 is closest to the engine. Tests: melted or chafed wiring near the exhaust
  2. Inspect the wiring and connector for heat damage where it runs near the exhaust. Tests: melted or chafed wiring near the exhaust
  3. Compare the sensor's temperature reading to the other EGT sensors on a cold engine — they should all read near ambient.
  4. Soak the threads with penetrating oil, then remove and replace the sensor if the wiring is sound.
  5. Clear the code and confirm temperatures track together on a test drive.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$60 – $200
Labor$100 – $200

Replacing the exhaust gas temperature sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U069B ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Exhaust sensors seize in place — soak the threads with penetrating oil and work on a cool exhaust.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →