Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA dead coolant pump can overheat the engine or turbo — watch the gauge constantly and stop if it climbs into the red.
Modern cars have small electric pumps moving coolant to the turbo, heater, or other spots. One of them stopped talking to the computer, so that circuit isn't being cooled on demand. Watch your temperature gauge — overheating is the risk here.
Key facts
U0699 means lost communication with coolant pump F. Modern cars have small electric pumps moving coolant to the turbo, heater, or other spots. One of them stopped talking to the computer, so that circuit isn't being cooled on demand. Watch your temperature gauge — overheating is the risk here. WrenchFair's published fair-price range for this repair is $150–$450 parts and $200–$400 labor at independent shops.
WrenchFair rates U0699 a 3-of-5 DIY difficulty (“Check the fuse first — it's the cheapest fix. Refill and bleed the cooling system after replacement.”) with a “Diagnose soon” driveability rating: A dead coolant pump can overheat the engine or turbo — watch the gauge constantly and stop if it climbs into the red. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
temperature gauge climbing
overheating in traffic
poor heater performance
coolant warning messages
Likely causes
failed electric coolant pump
blown pump fuse
corroded or loose connector
damaged wiring
low coolant
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the coolant level and the pump's fuse before touching anything. Tests: failed electric coolant pump
Locate coolant pump F and inspect its connector for corrosion. Tests: failed electric coolant pump
With a scan tool, command the pump on — you should hear or feel it run.
Verify power and ground at the pump connector with a test light. Tests: corroded or loose connector
Replace the pump if power is present but it doesn't run; refill, bleed, and verify operation.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $450
Labor$200 – $400
Replacing the electric auxiliary coolant pump. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0699 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Check the fuse first — it's the cheapest fix. Refill and bleed the cooling system after replacement.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →