U0692: Lost communication with exhaust pressure sensor B
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBackpressure feedback is missing — drivable, but get it fixed so the turbo and emissions systems work correctly.
A sensor measures pressure in your exhaust to help control the turbo and emissions systems. It went silent. Expect a check engine light and possibly reduced power.
Key facts
U0692 means lost communication with exhaust pressure sensor B. A sensor measures pressure in your exhaust to help control the turbo and emissions systems. It went silent. Expect a check engine light and possibly reduced power. WrenchFair's published fair-price range for this repair is $60–$180 parts and $100–$200 labor at independent shops.
WrenchFair rates U0692 a 2-of-5 DIY difficulty (“Check the small sensing tube for soot blockage — a clogged tube mimics a dead sensor.”) with a “Diagnose soon” driveability rating: Backpressure feedback is missing — drivable, but get it fixed so the turbo and emissions systems work correctly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
reduced engine power
poor turbo response
worse fuel economy
Likely causes
failed exhaust pressure sensor
soot-clogged sensing tube
heat-damaged wiring
corroded connector
exhaust restriction
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate exhaust pressure sensor B and its sensing tube; check for soot clogging in the tube. Tests: failed exhaust pressure sensor
Inspect the connector and wiring for heat damage. Tests: heat-damaged wiring
Watch the pressure reading on a scan tool at idle and under load — no change means a dead sensor. Tests: failed exhaust pressure sensor
Clear the sensing tube or replace the sensor as needed; clear and retest. Tests: soot-clogged sensing tube
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $180
Labor$100 – $200
Replacing the exhaust pressure sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0692 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Check the small sensing tube for soot blockage — a clogged tube mimics a dead sensor.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →