U0679: Lost communication with transmission fluid pressure sensor/switch A
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe transmission is shifting without pressure feedback — drive gently and get it diagnosed soon to avoid internal damage.
Your automatic transmission watches its fluid pressure closely to shift smoothly. That sensor went quiet. Expect harsh or delayed shifts and a warning light — the transmission is protecting itself.
Key facts
U0679 means lost communication with transmission fluid pressure sensor/switch A. Your automatic transmission watches its fluid pressure closely to shift smoothly. That sensor went quiet. Expect harsh or delayed shifts and a warning light — the transmission is protecting itself. WrenchFair's published fair-price range for this repair is $80–$250 parts and $200–$500 labor at independent shops.
WrenchFair rates U0679 a 4-of-5 DIY difficulty (“Often inside the transmission — check the fluid level and condition first, since that's free.”) with a “Diagnose soon” driveability rating: The transmission is shifting without pressure feedback — drive gently and get it diagnosed soon to avoid internal damage. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
harsh or delayed shifts
transmission warning
limp mode
slipping
Likely causes
failed pressure sensor
low or burnt transmission fluid
corroded connector
damaged internal wiring
valve body issues
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the transmission fluid level and condition — low or burnt fluid must be addressed first. Tests: low or burnt transmission fluid
Inspect the external transmission connector for ATF or corrosion. Tests: low or burnt transmission fluid
Watch line pressure on a scan tool during shifts. Tests: failed pressure sensor
If the sensor is internal, have a transmission shop test and replace it — the pan usually has to come off. Tests: low or burnt transmission fluid
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $250
Labor$200 – $500
Replacing the transmission fluid pressure sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0679 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Often inside the transmission — check the fluid level and condition first, since that's free.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →