U0668: Lost communication with engine oil level sensor circuit
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou have no low-oil warning right now — check the dipstick regularly until this is repaired, because running low on oil destroys engines.
Your car has a sensor that warns you when oil gets low — and it just went offline. The dangerous part isn't the sensor, it's that you won't get a warning if oil drops. Check the dipstick yourself until it's fixed.
Key facts
U0668 means lost communication with engine oil level sensor circuit. Your car has a sensor that warns you when oil gets low — and it just went offline. The dangerous part isn't the sensor, it's that you won't get a warning if oil drops. Check the dipstick yourself until it's fixed. WrenchFair's published fair-price range for this repair is $40–$150 parts and $100–$200 labor at independent shops.
WrenchFair rates U0668 a 2-of-5 DIY difficulty (“Mounted in the oil pan — often replaced at an oil change since the oil has to come out anyway.”) with a “Diagnose soon” driveability rating: You have no low-oil warning right now — check the dipstick regularly until this is repaired, because running low on oil destroys engines. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
oil level warning stuck on or off
no low-oil warning when needed
Likely causes
failed oil level sensor
sludged oil fouling the sensor
oil-contaminated connector
damaged wiring
engine computer communication fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the oil level on the dipstick right now — do not trust the dashboard until this is fixed.
Locate the sensor in the oil pan and inspect its connector for oil or corrosion. Tests: oil-contaminated connector
If oil is sludged, change the oil and filter first — sludge fouls the sensor. Tests: sludged oil fouling the sensor
Replace the sensor if the code returns with clean oil and good wiring.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$100 – $200
Replacing the engine oil level sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0668 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Mounted in the oil pan — often replaced at an oil change since the oil has to come out anyway.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →