U0656: Lost communication with turbocharger/supercharger boost control A position sensor
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBoost control is degraded — drive gently until repaired.
A sensor reports the position of the part that controls your turbo's boost. It stopped responding. Expect a check engine light and the car limiting power to protect itself.
Key facts
U0656 means lost communication with turbocharger/supercharger boost control A position sensor. A sensor reports the position of the part that controls your turbo's boost. It stopped responding. Expect a check engine light and the car limiting power to protect itself. WrenchFair's published fair-price range for this repair is $80–$250 parts and $100–$200 labor at independent shops.
WrenchFair rates U0656 a 2-of-5 DIY difficulty (“Check the vacuum lines first — a cracked line causes the same symptoms for free.”) with a “Diagnose soon” driveability rating: Boost control is degraded — drive gently until repaired. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
erratic boost
reduced power
limp mode
Likely causes
failed boost control position sensor
sticking boost control solenoid
damaged wiring
corroded connector
vacuum line leak to the actuator
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate the boost control solenoid/actuator and inspect its connector and vacuum lines. Tests: sticking boost control solenoid
Test the actuator with a hand vacuum pump — it should hold vacuum and move smoothly. Tests: vacuum line leak to the actuator
Watch the position reading on a scan tool while commanding the solenoid. Tests: failed boost control position sensor
Replace the faulty component; clear and verify boost response.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $250
Labor$100 – $200
Replacing the boost control solenoid or position sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0656 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Check the vacuum lines first — a cracked line causes the same symptoms for free.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →