U064D: Lost communication with trailer brake control switch
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTrailer braking may be degraded or absent — do not tow until verified.
The switch that controls your trailer's brakes stopped talking to the computer. The trailer brakes may default to a fixed setting or not work — do not tow until this is fixed.
Key facts
U064D means lost communication with trailer brake control switch. The switch that controls your trailer's brakes stopped talking to the computer. The trailer brakes may default to a fixed setting or not work — do not tow until this is fixed. WrenchFair's published fair-price range for this repair is $60–$200 parts and $80–$180 labor at independent shops.
WrenchFair rates U064D a 2-of-5 DIY difficulty (“Usually pops out of the dash — check the trailer fuses first.”) with a “Diagnose soon” driveability rating: Trailer braking may be degraded or absent — do not tow until verified. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
trailer brake warning
no trailer brake output
check engine light on
Likely causes
failed brake control switch
loose connector behind the dash
damaged wiring
blown trailer fuse
controller communication fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the trailer brake fuses before anything else. Tests: blown trailer fuse
Remove the switch from the dash and inspect its connector. Tests: loose connector behind the dash
Test trailer brake output with a trailer connected or a tester. Tests: blown trailer fuse
Replace the switch if it won't communicate; verify output before towing.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $200
Labor$80 – $180
Replacing the trailer brake control switch. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U064D ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Usually pops out of the dash — check the trailer fuses first.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →