U064C: Lost communication with hybrid/EV battery pack current sensor C
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBattery current monitoring is a safety input — the car is in a protected mode, so get it to a specialist.
A sensor measures the electricity flowing in and out of your hybrid or EV battery so the car can manage charging safely. It went quiet. The car limits power and charging to stay safe.
Key facts
U064C means lost communication with hybrid/EV battery pack current sensor C. A sensor measures the electricity flowing in and out of your hybrid or EV battery so the car can manage charging safely. It went quiet. The car limits power and charging to stay safe. WrenchFair's published fair-price range for this repair is $200–$600 parts and $200–$500 labor at independent shops.
WrenchFair rates U064C a 4-of-5 DIY difficulty (“The sensor is often inside the battery pack — this is usually a job for a hybrid/EV specialist.”) with a “Diagnose soon” driveability rating: Battery current monitoring is a safety input — the car is in a protected mode, so get it to a specialist. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
hybrid/EV warning light
reduced power
charging limited or disabled
battery warning messages
Likely causes
failed current sensor
corroded connector
damaged wiring
sensor inside the battery pack (specialist repair)
controller communication fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Read all hybrid/EV codes — current sensor faults often come with companion codes. Tests: failed current sensor
Inspect the accessible battery pack connectors for corrosion (service disconnect procedure first). Tests: sensor inside the battery pack (specialist repair)
Check for software updates or service bulletins for the battery controller. Tests: sensor inside the battery pack (specialist repair)
Have a hybrid/EV specialist diagnose the pack — internal sensor replacement needs pack opening. Tests: sensor inside the battery pack (specialist repair)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$200 – $600
Labor$200 – $500
Replacing the battery pack current sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U064C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — The sensor is often inside the battery pack — this is usually a job for a hybrid/EV specialist.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →