U061A: Lost communication with reductant level sensor B
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car can't warn you about low DEF — keep it topped up, since running dry can trigger limp mode.
A sensor watches how much exhaust-cleaning fluid (DEF) is in the tank. It went quiet. The car can't warn you before it runs out — and running out can trigger a countdown to limited speed. Keep the tank topped up until it's fixed.
Key facts
U061A means lost communication with reductant level sensor B. A sensor watches how much exhaust-cleaning fluid (DEF) is in the tank. It went quiet. The car can't warn you before it runs out — and running out can trigger a countdown to limited speed. Keep the tank topped up until it's fixed. WrenchFair's published fair-price range for this repair is $150–$400 parts and $120–$250 labor at independent shops.
WrenchFair rates U061A a 3-of-5 DIY difficulty (“Often part of the DEF tank module — keep the tank full as a workaround, and rinse any spills.”) with a “Diagnose soon” driveability rating: The car can't warn you about low DEF — keep it topped up, since running dry can trigger limp mode. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
def warning light
check engine light on
incorrect def level reading
countdown to speed limitation
Likely causes
failed DEF level sensor
crystallized DEF fouling the sensor
corroded connector
frozen DEF in winter
damaged wiring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Top up the DEF tank with fresh fluid — never let it run dry with this code active.
Inspect the tank module connector for white crystalline deposits. Tests: corroded connector
Watch the level reading on a scan tool while adding DEF.
Replace the level sensor/tank module if the reading never changes; clear and retest. Tests: failed DEF level sensor
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $400
Labor$120 – $250
Replacing the DEF level sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U061A ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Often part of the DEF tank module — keep the tank full as a workaround, and rinse any spills.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →