U060A: Lost communication with manifold absolute pressure sensor B
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonEngine load is estimated — drivable, but fix it soon to protect fuel economy and the catalytic converter.
There's a second sensor measuring air pressure in your intake. The computer can't reach it, so it estimates engine load instead. Expect a check engine light and slightly rougher running.
Key facts
U060A means lost communication with manifold absolute pressure sensor B. There's a second sensor measuring air pressure in your intake. The computer can't reach it, so it estimates engine load instead. Expect a check engine light and slightly rougher running. WrenchFair's published fair-price range for this repair is $40–$120 parts and $60–$140 labor at independent shops.
WrenchFair rates U060A a 2-of-5 DIY difficulty (“Usually on the intake manifold with one bolt — check the vacuum hose and port while you're there.”) with a “Diagnose soon” driveability rating: Engine load is estimated — drivable, but fix it soon to protect fuel economy and the catalytic converter. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
rough idle
hesitation on acceleration
poor fuel economy
Likely causes
failed MAP sensor B
loose or corroded connector
cracked vacuum hose to the sensor
carbon-clogged sensor port
damaged wiring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate MAP sensor B on the intake and inspect its connector. Tests: loose or corroded connector
Check the vacuum hose and sensor port for cracks or carbon buildup. Tests: cracked vacuum hose to the sensor
Compare its reading to MAP sensor A on a scan tool — they should track together.
Replace the sensor if wiring is good; clear and retest.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $120
Labor$60 – $140
Replacing MAP sensor B. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U060A ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Usually on the intake manifold with one bolt — check the vacuum hose and port while you're there.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →