U0600

U0600: Internal control module memory reset

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

One of your car's computers lost its saved settings, like unplugging something and having it forget everything. This usually happens after the battery dies or gets disconnected. The car may run a little rough until it relearns, but it often sorts itself out.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Note whether the battery was recently disconnected, replaced, or went flat — that alone explains this code. Tests: battery disconnected or replaced recently
  2. Check battery terminals for corrosion and tightness, and test the battery and charging system. Tests: battery disconnected or replaced recently
  3. Clear the code with a scan tool and drive normally for several trips so the module can relearn.
  4. If the code returns with no battery event, check the module's power and ground connections. Tests: battery disconnected or replaced recently
  5. If it still returns, the module itself may be failing and need replacement and programming by a shop.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$0 – $150
Labor$0 – $100

Inspecting and testing the battery and charging system, then clearing the code. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0600 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Often just needs the code cleared and a few drive cycles — but check the battery and charging system first.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →