Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonLost adaptions usually relearn on their own, but a module that keeps resetting can leave systems unreliable — address the power supply first.
One of your car's computers lost its saved settings, like unplugging something and having it forget everything. This usually happens after the battery dies or gets disconnected. The car may run a little rough until it relearns, but it often sorts itself out.
Key facts
U0600 means internal control module memory reset. One of your car's computers lost its saved settings, like unplugging something and having it forget everything. This usually happens after the battery dies or gets disconnected. The car may run a little rough until it relearns, but it often sorts itself out. WrenchFair's published fair-price range for this repair is $0–$150 parts and $0–$100 labor at independent shops.
WrenchFair rates U0600 a 2-of-5 DIY difficulty (“Often just needs the code cleared and a few drive cycles — but check the battery and charging system first.”) with a “Diagnose soon” driveability rating: Lost adaptions usually relearn on their own, but a module that keeps resetting can leave systems unreliable — address the power supply first. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
multiple warning lights
rough idle or odd shifting until relearn
lost radio presets or clock
module functions temporarily unavailable
Likely causes
battery disconnected or replaced recently
weak or failing battery causing a deep voltage drop
module reflash or coding change
control module losing power intermittently
failing control module
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Note whether the battery was recently disconnected, replaced, or went flat — that alone explains this code. Tests: battery disconnected or replaced recently
Check battery terminals for corrosion and tightness, and test the battery and charging system. Tests: battery disconnected or replaced recently
Clear the code with a scan tool and drive normally for several trips so the module can relearn.
If the code returns with no battery event, check the module's power and ground connections. Tests: battery disconnected or replaced recently
If it still returns, the module itself may be failing and need replacement and programming by a shop.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $150
Labor$0 – $100
Inspecting and testing the battery and charging system, then clearing the code. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0600 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Often just needs the code cleared and a few drive cycles — but check the battery and charging system first.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →