U05A1

U05A1: NOx Sensor A Received Invalid Data From ECM/PCM

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The exhaust sensor that measures pollution got nonsense numbers from the engine computer, so it stopped trusting them. This usually means the engine computer itself has a problem — often one of its own sensors feeding it bad information.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Test the battery and charging system first — low voltage corrupts network data. Tests: weak battery or failing charging system
  2. Scan every module and record all codes; fix any faults the engine computer reports about itself or its own sensors first. Tests: a sensor feeding the engine computer reporting bad values
  3. Inspect the wiring and connectors between the engine computer and a NOx exhaust emissions sensor for corrosion, damage, or poor grounds. Tests: damaged wiring or connector between the engine computer and the sensor
  4. Clear codes, drive normally, and rescan — if the engine computer keeps broadcasting bad values with good inputs, it needs reprogramming or replacement (usually a dealer job). Tests: a sensor feeding the engine computer reporting bad values
  5. If the engine computer checks out, NOx exhaust emissions sensor itself may be failing.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $600
Labor$120 – $300

Replacing a NOx exhaust emissions sensor, or repairing its wiring to the engine computer. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U05A1 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Checking the battery, connectors, and the engine computer's own codes is solid DIY work; condemning the engine computer isn't.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →