Diagnose soonThe affected feature may quit without warning — inconvenient, and occasionally a visibility or security issue.
Your car has a dozen-plus small computers that constantly share data. The body computer (lights, locks, wipers) is sending messages that don't make sense — impossible numbers, frozen values, or garbled frames — so the other computers are ignoring it. Whatever that part controls may act up or quit without warning.
Key facts
U0422 means invalid Data Received From Body Control Module. Your car has a dozen-plus small computers that constantly share data. The body computer (lights, locks, wipers) is sending messages that don't make sense — impossible numbers, frozen values, or garbled frames — so the other computers are ignoring it. Whatever that part controls may act up or quit without warning. WrenchFair's published fair-price range for this repair is $150–$600 parts and $120–$300 labor at independent shops.
WrenchFair rates U0422 a 2-of-5 DIY difficulty (“Checking the battery, connectors, and wiring is solid DIY work; condemning or replacing the module itself usually isn't.”) with a “Diagnose soon” driveability rating: The affected feature may quit without warning — inconvenient, and occasionally a visibility or security issue. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Service bulletins: 2,203 factory bulletins on file for this vehicle (mostly Equipment, Electrical System, Engine And Engine Cooling) — see the latest ones
On your 2016–2019 Chevrolet Malibu (1.5L Turbo, 2.0L Turbo) — Service Stabilitrak + dead brake lights — EBCM software (TSB 19-NA-202):Owner-verified
Dealer scan tool and programming — no DIY disassembly. The value for owners is knowing the documented fix before a shop sells parts.
Do this test first: Test the battery and charging system first — low or unstable voltage is the most common cause of garbage data on the network.
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for U0422 on the 2016–2019 Chevrolet Malibu — but the community-sourced Service Stabilitrak + dead brake lights — EBCM software (TSB 19-NA-202) note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Torque specs
EBCM programming: verify — No mechanical fasteners — dealer programming procedure. The TSB stresses stable battery voltage during programming.
Tips
Symptom cluster: "Service Stabilitrak" on the driver info center PLUS inoperative rear brake lights and the traction-control light — with DTCs C0595, C0277 (brake pedal position sensor circuit codes), and U0422.
Per GM TSB 19-NA-202 (September 2019, Malibu 2016–2019), the cause is a software anomaly in the electronic brake control module — and the bulletin explicitly says DO NOT replace the brake pedal position sensor. The correction is reprogramming the EBCM with the latest software.
Owner value: if a shop quotes a brake pedal position sensor (or a brake booster control module) for this exact symptom cluster, point them at TSB 19-NA-202 first — the software update is the documented fix and may be covered.
Safety note: with the stop lamps inoperative the car is not road-legal at night. Check whether your brake lights work before driving, and treat this as fix-soon.
Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
affected feature works only sometimes
warning messages on the dash
other modules log the same code
related functions stop responding
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
weak battery or failing alternator corrupting network data 2 owner notes link this repair to U0422
corroded or loose connector at the body computer (lights, locks, wipers) 2 owner notes link this repair to U0422
damaged wiring or poor ground to the body computer (lights, locks, wipers) 2 owner notes link this repair to U0422
a sensor feeding the body computer (lights, locks, wipers) reporting bad values 2 owner notes link this repair to U0422
software/calibration mismatch after a repair 2 owner notes link this repair to U0422
internal fault in the body computer (lights, locks, wipers) 2 owner notes link this repair to U0422
Owner notes linked to U0422: 2 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Test the battery and charging system first — low or unstable voltage is the most common cause of garbage data on the network. Tests: weak battery or failing alternator corrupting network data
Scan every module on the vehicle and record all codes; pay special attention to any faults the body computer (lights, locks, wipers) reports about itself or its own sensors. Tests: a sensor feeding the body computer (lights, locks, wipers) reporting bad values
Inspect the body computer (lights, locks, wipers)'s connector and wiring for corrosion, loose or pushed-back pins, water intrusion, or rodent damage, and verify its power and ground feeds. Tests: corroded or loose connector at the body computer (lights, locks, wipers)
Clear all codes, drive normally, and rescan — if this code returns together with the body computer (lights, locks, wipers)'s own sensor or input codes, fix those inputs first, since bad data in means bad data out. Tests: a sensor feeding the body computer (lights, locks, wipers) reporting bad values
If power, ground, and wiring all test good and the body computer (lights, locks, wipers) keeps broadcasting implausible values, the module itself is suspect — replacement or reprogramming is usually a dealer or specialist job.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2016–2019 Chevrolet Malibu: Service Stabilitrak + dead brake lights — EBCM software (TSB 19-NA-202) — test first, then buy for this job.
The price range below is a national planning range for U0422 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$150 – $600
Labor$120 – $300
Repairing the wiring or connector at the body computer (lights, locks, wipers), or replacing the module. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0422 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Checking the battery, connectors, and wiring is solid DIY work; condemning or replacing the module itself usually isn't.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →