P2E0B

P2E0B: Gear Lever Position Sensor C Circuit High

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The sensors that tell the car which gear you selected - sensor c - are reporting a high circuit signal. The car may not agree with you about what gear it is in.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code and watch the gear-position PIDs while slowly moving the shifter through every position. Tests: Worn shifter mechanism giving false positions
  2. The sensor that disagrees with the shifter's actual position is the faulty one. Tests: Failed position sensor (most common)
  3. Inspect the shifter assembly for spills, debris, or physical damage - coffee kills more shifters than electronics do. Tests: Spilled drinks or debris in the shifter assembly
  4. Check the sensor wiring and connectors, especially where the harness flexes. Tests: Damaged wiring where the harness flexes
  5. Replace the faulty sensor or shifter assembly, then verify every position reads correctly.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $500
Labor$150 – $400

Gear position sensor or shifter assembly replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2E0B ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Most of this is watching PIDs and inspecting the shifter; sensor replacement is usually trim-panel work.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →