Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA generator that cannot charge leaves you on borrowed battery - get it to a qualified tech.
The generator that recharges your hybrid's battery is not being monitored or powered correctly. Expect reduced charging and possible warnings. Usually wiring, the inverter supply, or the generator itself.
Key facts
P2CC1 means generator Voltage Sense Circuit B. The generator that recharges your hybrid's battery is not being monitored or powered correctly. Expect reduced charging and possible warnings. Usually wiring, the inverter supply, or the generator itself. WrenchFair's published fair-price range for this repair is $300–$2000 parts and $400–$800 labor at independent shops.
WrenchFair rates P2CC1 a 5-of-5 DIY difficulty (“Generator/inverter work is for qualified EV technicians.”) with a “Diagnose soon” driveability rating: A generator that cannot charge leaves you on borrowed battery - get it to a qualified tech. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
hybrid/ev warning on
reduced regenerative charging
battery not maintaining charge
Likely causes
Damaged wiring or corroded connector in the sense/supply circuit (most common)
Failed generator inverter power supply B
Generator winding or sensor fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Do not open, probe, or service the high-voltage system yourself - it carries lethal voltage. Diagnose only up to the low-voltage control side; anything involving the pack, contactors, inverter, or orange HV cabling is qualified-technician work. Tests: Failed generator inverter power supply B
Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor.
Have a qualified EV technician test the generator sense and inverter supply circuits per the service manual. Tests: Damaged wiring or corroded connector in the sense/supply circuit (most common)
Repair or replace as diagnosed, clear the code, and confirm normal generation.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $2000
Labor$400 – $800
Generator or inverter supply repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2CC1 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Generator/inverter work is for qualified EV technicians.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →