Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonElectrical faults can be intermittent. Diagnose before they strand you.
Your transmission's computer isn't getting enough electrical power, so it acts erratically - wrong shifts or limp mode. It's often a bad relay or corroded connection, not a bad computer.
VW/Audi note (VCDS): Watch TCM supply voltage PID during a drive; dips under load reveal the bad connection.
Model notes: Never replace a TCM for a voltage code until power and ground are proven perfect - replacement modules can't fix a bad relay, and they often need programming.
Key facts
P0882 means tCM power input signal low. Your transmission's computer isn't getting enough electrical power, so it acts erratically - wrong shifts or limp mode. It's often a bad relay or corroded connection, not a bad computer. WrenchFair's published fair-price range for this repair is $20–$150 parts and $100–$300 labor at independent shops.
WrenchFair rates P0882 a 2-of-5 DIY difficulty (“Power and ground checks first - the TCM itself is rarely the fault.”) with a “Diagnose soon” driveability rating: Electrical faults can be intermittent. Diagnose before they strand you. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
erratic shifting
limp mode
TCM communication errors
check engine light
traction control disabled
abs disabled
won't shift out of gear
Likely causes
Failing TCM power relay (most common)
Corroded power or ground connections
Blown fuse
Weak battery or charging system
Damaged wiring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check battery voltage and charging system - a weak battery causes TCM voltage codes Tests: Weak battery or charging system
Swap the TCM power relay with an identical one Tests: Failing TCM power relay (most common)
Voltage-drop test the TCM power and ground circuits under load Tests: Corroded power or ground connections
Clean and tighten all related grounds
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $150
Labor$100 – $300
Wiring or small electrical part is typical. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0882 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Power and ground checks first - the TCM itself is rarely the fault.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →