P2C90: Crankcase Ventilation System - Hose A Disconnected
DIY difficulty 1/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonAn open breather hose leans out the mixture and vents oil vapor - reconnect it promptly.
A crankcase breather hose (hose A) has come off. You might hear a hissing, notice a rough idle, or smell oil. It is usually a quick fix - push it back on and make sure the clamp or quick-connect actually holds.
Key facts
P2C90 means crankcase Ventilation System - Hose A Disconnected. A crankcase breather hose (hose A) has come off. You might hear a hissing, notice a rough idle, or smell oil. It is usually a quick fix - push it back on and make sure the clamp or quick-connect actually holds. WrenchFair's published fair-price range for this repair is $10–$80 parts and $50–$150 labor at independent shops.
WrenchFair rates P2C90 a 1-of-5 DIY difficulty (“Often a five-minute reconnect; replacement hoses are cheap and simple.”) with a “Diagnose soon” driveability rating: An open breather hose leans out the mixture and vents oil vapor - reconnect it promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
rough idle
hissing from the engine bay
oil smell
lean fuel-trim codes
Likely causes
Hose A popped off its fitting - aged rubber, weak clamp, or disturbed during other work (most common)
Cracked or split hose that will not stay connected
Broken quick-connect fitting
Oil contamination softening the hose end
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. - expect lean codes alongside this one.
Locate hose A per the service manual and inspect both ends and the full length.
Reconnect or replace the hose, ensuring clamps or quick-connects seat positively. Tests: Broken quick-connect fitting
Clear the codes and confirm fuel trims return to normal at idle.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$10 – $80
Labor$50 – $150
Crankcase breather hose reconnection or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2C90 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
1 of 5 — Often a five-minute reconnect; replacement hoses are cheap and simple.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →