Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA dead cooling fan will overheat the engine in traffic - watch the gauge and fix it before summer driving.
One of your radiator cooling fans (fan 2) is not responding correctly. In traffic or with the A/C on, the engine can run hot. Usually the fan motor, its relay or control module, or wiring.
Key facts
P2B31 means fan 2 Performance/Stuck Off. One of your radiator cooling fans (fan 2) is not responding correctly. In traffic or with the A/C on, the engine can run hot. Usually the fan motor, its relay or control module, or wiring. WrenchFair's published fair-price range for this repair is $50–$300 parts and $100–$250 labor at independent shops.
WrenchFair rates P2B31 a 2-of-5 DIY difficulty (“Fan diagnosis is fuse/relay plus power testing; fan assembly swaps are basic hand tools.”) with a “Diagnose soon” driveability rating: A dead cooling fan will overheat the engine in traffic - watch the gauge and fix it before summer driving. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
engine running hot in traffic
a/c blowing warm at idle
fan noise absent when it should be running
Likely causes
Failed fan 2 motor (most common - they wear out)
Failed fan 2 relay or control module
Blown fuse or damaged wiring to the fan
Debris jamming the fan blades
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor.
With the engine running and A/C on, check whether fan 2 spins - and clear any debris from the blades. Tests: Debris jamming the fan blades
Check the fan 2 fuse, relay, and wiring. Tests: Blown fuse or damaged wiring to the fan
Command the fan with a scan tool and test for power and ground at the motor.
Replace the fan 2 motor, relay, or module as diagnosed, clear the code, and confirm the fan cycles normally.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $300
Labor$100 – $250
Cooling fan 2 motor or relay replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2B31 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Fan diagnosis is fuse/relay plus power testing; fan assembly swaps are basic hand tools.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →