P2AD2

P2AD2: Throttle/Pedal Position Sensor/Switch B/G Voltage Correlation

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car double-checks the gas pedal and throttle against each other, and two of those sensors disagreed. Expect reduced power or a limp mode - the computer will not trust a throttle it cannot verify. Usually one of the sensors or a wiring fault.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. Tests: Faulty 5-volt reference shared by the sensors
  2. Watch all throttle and pedal position sensors in live data while slowly pressing the pedal - the odd one out in the B/G pair is the liar. Tests: Failing sensor in the B/G pair (most common - check live data to see which one disagrees)
  3. Inspect the throttle body and pedal wiring and connectors. Tests: Damaged wiring or corroded connector in the throttle/pedal circuit
  4. Check the 5-volt reference voltage to the sensors. Tests: Faulty 5-volt reference shared by the sensors
  5. Replace the faulty sensor (or throttle body / pedal assembly as applicable), clear the code, and confirm all sensors agree through the full pedal travel.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $400
Labor$100 – $300

Throttle or pedal position sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2AD2 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Live-data detective work first; the fix is usually a sensor or assembly swap.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →