P2A70

P2A70: Alternative Fuel Hydraulic Fuel Pump Select Valve Control Circuit

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your CNG/LPG system has electrically controlled valves that switch fuel sources, and the one called the alternative fuel hydraulic fuel pump select valve is not behaving. The system will usually just stay on regular gasoline until it is fixed - annoying, not dangerous. A stuck valve, tired solenoid, or wiring fault is the typical cause.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. Tests: Low system voltage or poor ground starving the solenoid
  2. Locate the alternative fuel hydraulic fuel pump select valve and inspect its wiring and connector for corrosion, heat damage, or loose pins. Tests: Failed alternative fuel hydraulic fuel pump select valve solenoid or valve (most common -…
  3. With the system commanded on, listen and feel for the valve clicking - a silent valve with good wiring points at the solenoid itself. Tests: Failed alternative fuel hydraulic fuel pump select valve solenoid or valve (most common -…
  4. Test the solenoid coil and its control circuit per the factory service manual. Tests: Damaged wiring or corroded connector in the valve control circuit
  5. Replace the alternative fuel hydraulic fuel pump select valve if it tests bad, clear the code, and confirm the system switches fuels normally.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $400
Labor$120 – $300

Alternative fuel hydraulic fuel pump select valve replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2A70 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Alt-fuel valves are simple electrical parts, but they live around pressurized fuel - diagnose the electrics yourself and let a qualified shop handle any fuel-line opening.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →