P2A37

P2A37: AFCM Power Relay Sense Circuit High

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The computer that runs your CNG/LPG system gets its power through a relay, and the relay circuit has an electrical fault (sense circuit high). When the alt-fuel computer loses power, the system just stays on gasoline. Often it is the relay itself, a blown fuse, or corroded wiring.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor.
  2. Check the AFCM fuses first, then swap the AFCM relay with a known-good identical relay as a quick test. Tests: Failed AFCM power relay (most common - contacts burn with age)
  3. Inspect the relay socket and wiring for corrosion, heat damage, or loose terminals. Tests: Corroded or loose wiring/connector in the relay circuit
  4. Test the relay control and sense circuits per the factory service manual. Tests: Corroded or loose wiring/connector in the relay circuit
  5. Replace the relay or repair the wiring, clear the code, and confirm the AFCM powers up reliably.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$20 – $120
Labor$80 – $200

AFCM power relay or fuse replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2A37 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Relay and fuse work is beginner-level; tracing the sense circuit takes a multimeter and the wiring diagram.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →