P2807

P2807: Pressure Control Solenoid G Malfunction

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

One of the electric valves that controls your transmission's hydraulic pressure isn't doing what the computer tells it. Expect slipping, harsh shifts, overheating, or the transmission stuck in a protective limp mode until it's fixed.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. 1. Research TSBs for your year, model, and transmission - some solenoid codes are known issues with a published fix. Tests: clogged transmission filter starving the solenoid of flow
  2. 2. Check the transmission fluid level and condition; burnt, dark, or glittery fluid is a common root cause. Tests: dirty or degraded transmission fluid
  3. 3. Inspect the transmission and pcm connectors and all solenoid wiring for corrosion, damage, and loose pins. Tests: clogged transmission filter starving the solenoid of flow
  4. 4. With a scan tool, watch solenoid G commanded vs. actual state and line pressure during a drive - no response points at the solenoid, a wrong response points at hydraulics. Tests: defective pressure control solenoid G
  5. 5. If the circuit is good, the pan comes off: inspect the solenoid, its filter screen, and the valve body for debris or sticking valves.
  6. 6. Replace the faulty solenoid (with fresh fluid and a new filter while the pan is off), clear the code, and verify pressure control on a test drive.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $450
Labor$250 – $700

Replacing the faulty pressure control solenoid G, usually with fresh fluid and a new filter while the pan is off. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2807 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Diagnosis is DIY-friendly with a scan tool and multimeter, but the repair usually means dropping the transmission pan and sometimes the valve body.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →